Rogers APN Settings
The Rogers APN is ltemobile.apn. Copy the values below into your phone's APN settings.
Verified October 2026
Rogers internet & MMS settings
Tap any value to copy it straight to your clipboard.
How to enter APN settings
Open Access Point Names
Go to
Settings → Network & Internet → Mobile network → Access Point Names. On some phones it's underSettings → Connections → Mobile networks.Add a new APN
Tap + (or the menu → New APN) and set APN to
ltemobile.apn. Fill any other non-blank values from the table above and leave the rest as default.Save and select it
Save from the menu, then select the new Rogers APN and toggle Airplane Mode on for ten seconds so the change takes effect.
Open the APN screen
Tap
Settings → Cellular → Cellular Data Network. If you don't see this option, Rogers locks APN editing, so contact them or install a carrier profile.Enter the APN
Under Cellular Data, set APN to
ltemobile.apn. Leave Username and Password blank unless the table above lists them.Save and restart data
Go back to apply the change, then toggle Airplane Mode on for ten seconds so the iPhone re-registers with Rogers.
Common issues
A guide gives the MMS proxy as 10.128.1.69. That's an older setting. Rogers now uses the hostname, mmsproxy.rogers.com, on port 80. Use that.
Hotspot won't share data. Rogers has a separate tethering APN, ltedata.apn, with APN type dun. Add it as a second APN and leave ltemobile.apn selected.
An old phone has no service. Rogers shut down its 850 MHz 3G network on August 7, 2025. A phone that only supports 3G can't connect, whatever the APN.
Frequently asked questions
Do I need to enter Rogers APN settings by hand?
Usually not. Rogers runs its own network, and most phones pull the settings automatically. You enter them manually when data or MMS stops working, often after a SIM swap, a factory reset, or moving the SIM into an unlocked phone.
How do I know it worked?
Turn off Wi-Fi and open any website. If it loads, data is working. For MMS, send a photo to a friend and confirm it goes through. A quick restart helps if either doesn't start right away.
Does Rogers support eSIM?
Yes. Rogers supports eSIM, and activation usually configures the data settings automatically, so you rarely touch the APN on an eSIM line.
Why won't my iPhone let me edit the APN?
Many carriers manage the iPhone APN through a hidden configuration profile, so the fields are locked or missing. That's normal. Resetting network settings re-pulls the profile and fixes most iPhone issues without manual entry.
These settings didn't fix it. What now?
Restart the phone first. If data still won't connect, reset network settings and let the carrier re-provision. If only MMS fails, re-check the MMSC and make sure mobile data is on. APN settings can't fix a deactivated line, an unpaid balance, or a locked phone.
