5GeSIMMVNOon Telus
Public Mobile APN Settings
Copy-ready access point name values for Public Mobile — verified on real devices, updated regularly.
Auto-provisioning
Many phones on Public Mobile receive APN settings automatically when a SIM is inserted. Only enter these manually if your device shows no data connection or was purchased unlocked.
Public Mobile APN Settings
Tap any value to copy it straight to your clipboard.
APNkey
sp.telus.com
Username
(leave blank)
Password
(leave blank)
Authentication
None
APN type
default,supl,mms
APN protocol
IPv4v6
APN roaming protocol
IPv4
Bearer
(leave blank)
MCC
302
MNC
220
Setup guide
How to enter APN settings
1
Open Access Point Names
Go to
Settings → Network & Internet → Mobile network → Access Point Names. On some phones it's under Settings → Connections → Mobile networks.2
Add a new APN
Tap + (or the menu → New APN) and set APN to
sp.telus.com. Fill any other non-blank values from the table above and leave the rest as default.3
Save and select it
Save from the menu, then select the new Public Mobile APN and toggle Airplane Mode on for ten seconds so the change takes effect.
Tip
After saving, toggle Airplane Mode on and off for 10 seconds. This forces the phone to re-register with the network and pick up the new APN.
Troubleshooting
Common issues
No phone support to help. Public Mobile is self-serve. Use these settings and the online community if data won't connect.
MMS not sending. Enter the Telus MMSC and proxy exactly, with mobile data on.
No data after activation. Add sp.telus.com by hand and restart.
FAQ
Frequently asked questions
Was this helpful?
Mobile Carriers in Canada
All carriers →