5GeSIMMVNOon au (KDDI)
UQ mobile APN Settings
Copy-ready access point name values for UQ mobile — verified on real devices, updated regularly.
Auto-provisioning
Many phones on UQ mobile receive APN settings automatically when a SIM is inserted. Only enter these manually if your device shows no data connection or was purchased unlocked.
UQ mobile APN Settings
Tap any value to copy it straight to your clipboard.
APNkey
uqmobile.jp
Username
uq@uqmobile.jp
Password
uq
Authentication
CHAP
APN type
default,supl,hipri
APN protocol
IPv4v6
APN roaming protocol
IPv4
Bearer
(leave blank)
MCC
440
MNC
51
Setup guide
How to enter APN settings
1
Open Access Point Names
Go to
Settings → Network & Internet → Mobile network → Access Point Names. On some phones it's under Settings → Connections → Mobile networks.2
Add a new APN
Tap + (or the menu → New APN) and set APN to
uqmobile.jp. Fill any other non-blank values from the table above and leave the rest as default.3
Save and select it
Save from the menu, then select the new UQ mobile APN and toggle Airplane Mode on for ten seconds so the change takes effect.
Tip
After saving, toggle Airplane Mode on and off for 10 seconds. This forces the phone to re-register with the network and pick up the new APN.
Troubleshooting
Common issues
No data on an unlocked or imported phone. Enter the APN by hand and restart. Set the APN to uqmobile.jp with username uq@uqmobile.jp, password uq and CHAP authentication. Imported phones often skip UQ mobile's automatic setup.
Connects but nothing loads. Check the APN protocol is set to IPv4v6. Choosing IPv6 on its own stops UQ mobile from passing traffic.
Saved the APN but still no data. After saving, you must select the UQ mobile profile from the APN list. If it isn't selected, the connection won't come up.
FAQ
Frequently asked questions
Was this helpful?
Mobile Carriers in Japan
All carriers →