5GeSIMMVNOon TIM
Veek APN Settings
Copy-ready access point name values for Veek — verified on real devices, updated regularly.
Auto-provisioning
Many phones on Veek receive APN settings automatically when a SIM is inserted. Only enter these manually if your device shows no data connection or was purchased unlocked.
Veek APN Settings
Tap any value to copy it straight to your clipboard.
APNkey
a85
Username
(leave blank)
Password
(leave blank)
Authentication
None
APN type
default,supl,mms
APN protocol
IPv4v6
APN roaming protocol
IPv4
Bearer
(leave blank)
MCC
724
MNC
04
Setup guide
How to enter APN settings
1
Open Access Point Names
Go to
Settings → Network & Internet → Mobile network → Access Point Names. On some phones it's under Settings → Connections → Mobile networks.2
Add a new APN
Tap + (or the menu → New APN) and set APN to
a85. Fill any other non-blank values from the table above and leave the rest as default.3
Save and select it
Save from the menu, then select the new Veek APN and toggle Airplane Mode on for ten seconds so the change takes effect.
Tip
After saving, toggle Airplane Mode on and off for 10 seconds. This forces the phone to re-register with the network and pick up the new APN.
Troubleshooting
Common issues
No data after activating a Veek chip. Veek SIMs often don't auto-configure. Add a new APN with the Name 'VEEK' and the APN value 'a85', leave username and password blank, save it, select it as active, and restart the phone.
Data works but MMS won't send. Veek carries picture messages over its host network. If MMS fails while browsing works, set the MMSC to http://mms.tim.br and the MMS proxy to 189.40.191.96:8080, and make sure mobile data is on.
SIM is on Vivo instead of TIM. Some Veek lines run on Vivo rather than TIM. If 'a85' won't connect, the data APN value is still 'a85', but use Vivo's MMS values for picture messaging on those lines.
FAQ
Frequently asked questions
Was this helpful?
Mobile Carriers in Brazil
All carriers →