Swisscom APN Settings
The Swisscom APN is gprs.swisscom.ch. Copy the values below into your phone's APN settings.
Swisscom internet & MMS settings
Tap any value to copy it straight to your clipboard.
How to enter APN settings
Open Access Point Names
Go to
Settings → Network & Internet → Mobile network → Access Point Names. On some phones it's underSettings → Connections → Mobile networks.Add a new APN
Tap + (or the menu → New APN) and set APN to
gprs.swisscom.ch. Fill any other non-blank values from the table above and leave the rest as default.Save and select it
Save from the menu, then select the new Swisscom APN and toggle Airplane Mode on for ten seconds so the change takes effect.
Open the APN screen
Tap
Settings → Mobile Service → Mobile Data Network. On some iPhones the menu is called Mobile Data. If you don't see this option, Swisscom locks APN editing, so contact them or install a carrier profile.Enter the APN
Under Mobile Data, set APN to
gprs.swisscom.ch. Leave Username and Password blank unless the table above lists them.Save and restart data
Go back to apply the change, then toggle Airplane Mode on for ten seconds so the iPhone re-registers with Swisscom.
Common issues
Data stops with full signal bars. Open the APN list and check that the proxy, port, username and password fields are empty. A leftover proxy blocks data. If you can't edit the entry, add a new APN named anything, enter gprs.swisscom.ch and select it.
Still no data on an iPhone. Install any pending update, then remove an old proxy under General, VPN & Device Management. If that doesn't help, reset network settings. Saved Wi-Fi passwords are lost.
Imported or unlocked phone. The phone may start with an empty APN. Enter gprs.swisscom.ch by hand and restart.
Frequently asked questions
Do I need to enter Swisscom APN settings by hand?
Usually not. Swisscom sets the APN when the SIM or eSIM goes in. Enter it by hand when mobile data stops working, often after a SIM swap, a factory reset or a move to an unlocked phone.
How do I know it worked?
Turn off Wi-Fi and open any website. If it loads, data is working. A quick restart helps if it doesn't start right away.
Why won't my iPhone let me edit the APN?
Many networks manage the iPhone APN through a hidden configuration profile, so the fields are locked or missing. That's normal. Resetting network settings re-pulls the profile and fixes most iPhone issues without manual entry.
What if my APN already has a proxy or won't save?
Clear the proxy, port, username and password. If you can't edit the entry, add a new APN under a different name, enter gprs.swisscom.ch and select it.
Does Swisscom support eSIM?
Yes. On iPhone you can install the eSIM from the My Swisscom app without scanning a QR code. Activation sets the data settings, so you rarely type the APN on an eSIM line.
About Swisscom
Swisscom runs its own radio network across Switzerland. Its APN is gprs.swisscom.ch, with no username, password or proxy. Phones normally set it themselves when the SIM goes in, so you only type it when data has stopped.
Swisscom sells eSIM, including a setup inside the My Swisscom app on iPhone, and VoLTE (4G calling), which switches on by itself on phones from 2020 onwards.
- Country
- Switzerland
- Type
- MNO
- 5G
- Yes
- eSIM
- Yes
- VoLTE
- Yes
- MCC / MNC
- 228 / 01
More help for Swisscom
- MMS not sendingFix picture and group messages that won't send or download.
- Data keeps disconnectingWhat to check when the values are right and data still drops.
- Setting up a travel eSIMA pre-departure checklist for installing and activating one.
- What is an APN?What each field on the settings screen does.